CN
JPOur standing seam roof solar mount uses compression clamps that eliminate drilling, saving 60% labor time versus traditional penetrative racks.
-
-
-
En
-
Using standing seam clamps and rails to connect the roof, the solar panel mounts for standing seam roofs keeps the original roof structure, ensuring a safe and simple installation and maintenance.
Utilizing aluminium alloy and anodized surface coating, the standing seam roof solar mount system excels in wind and snow resistance, ensuring long-term performance for commercial and residential applications.
Our standing seam metal roof solar mount is compatible with over 90% of standard standing seam types (2.0-4.0mm thickness), allowing for quick installation without customization. The modular design allows for free adjustment of the tilt angle from 0° to 30°. A single solar racking system for standing seam roofs can meet the needs of photovoltaic arrays at different latitudes and seasons.
Our standing seam metal roof solar panel mounting clips feature a self-locking ratchet design that maintains a tightening force of over 25 Nm after 2000 thermal cycle tests, eliminating the risk of loosening due to thermal expansion and contraction. All standing seam metal roof solar panel mounting clips undergo dynamic load simulation testing before shipment.
Framed PV modules, frameless PV modules
The standing seam roof solar mount is suitable for commercial and industrial buildings, from warehouses to solar farms.
Standing seam metal roof solar panel mounting clip + rail
Datong Yunzhou, Wansheng, Kunming Project
Materials of the standing seam metal roof solar mounts: Aluminium Alloy
Service life of the standing seam metal roof solar mount: 25 years
Maximum wind load: 0.8kN/m²
Maximum snow load: 0.8kN/m²
Foundation type: Roof Hooks + rail
Angle: In line with the slope of the roof or customized
Coating: Surface anodized
| Feature | Standing Seam Metal Roof | Ribbed Metal Roof (Corrugated/Trapezoidal) |
|---|---|---|
| Mounting Method | Clamps onto raised seams (no penetration) | Requires penetrating screws into roof ribs or structural supports |
| Installation Speed | Faster (pre-assembled clamps, no drilling) | Slower (requires drilling & sealing) |
| Roof Integrity | Zero roof penetration → better waterproofing | Potential leaks if sealing fails over time |
| Load Distribution | Evenly distributes weight along seams | Requires reinforcement at screw points |
| Wind Uplift Resistance | Stronger (direct attachment to structural seams) | Moderate (depends on screw placement) |
| Compatibility | Works only with true standing seam profiles | Works with corrugated, trapezoidal, and other ribbed panels |
| Maintenance | Lower (no sealant degradation) | Higher (requires periodic sealant checks) |
| Cost | Higher (specialized clamps & engineering) | Lower (standard L-feet & direct fastening) |
| Best For | Commercial/industrial roofs, long-term reliability | Budget projects, simple residential installs |
Our standing seam roof solar mount uses compression clamps that eliminate drilling, saving 60% labor time versus traditional penetrative racks.
Pre-assembled solar racking for standing seam roof reduces on-site fitting by 75%, with universal compatibility for 3"-18" seam spacing.
Tool-free locking mechanisms on standing seam metal roof solar mounts enable 1-worker installation at 30% faster speed.
Integrated rail-less design allows PV modules to mount directly onto standing seam roof solar mount, cutting material costs by 15%.
